Cookie-Einstellungen
Diese Website benutzt Cookies, die für den technischen Betrieb der Website erforderlich sind und stets gesetzt werden. Andere Cookies, die den Komfort bei Benutzung dieser Website erhöhen, der Direktwerbung dienen oder die Interaktion mit anderen Websites und sozialen Netzwerken vereinfachen sollen, werden nur mit Ihrer Zustimmung gesetzt.
Konfiguration
Technisch erforderlich
Diese Cookies sind für die Grundfunktionen des Shops notwendig.
"Alle Cookies ablehnen" Cookie
"Alle Cookies annehmen" Cookie
Ausgewählter Shop
CSRF-Token
Cookie-Einstellungen
Individuelle Preise
Kundenspezifisches Caching
PayPal-Zahlungen
Session
Währungswechsel
Komfortfunktionen
Diese Cookies werden genutzt um das Einkaufserlebnis noch ansprechender zu gestalten, beispielsweise für die Wiedererkennung des Besuchers.
Merkzettel
Statistik & Tracking
Endgeräteerkennung
Partnerprogramm
DCCconcepts DCP-CBSS-2 2x Cobalt-SS with Controller & Accessories
Dieser Artikel steht derzeit nicht zur Verfügung!
57,83 € *
inkl. MwSt. zzgl. Versandkosten.
Abhängig vom Lieferland kann die MwSt. an der Kasse variieren.
Lagerbestand: 0
- Artikel-Nr.: LF74-DCP-CBSS-2
- EAN: 934739400100
- UVP: 62,64
DCCconcepts Cobalt-SS – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC... mehr
Produktinformationen "DCCconcepts DCP-CBSS-2 2x Cobalt-SS with Controller & Accessories"
DCCconcepts
Cobalt-SS – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
Cobalt-SS 2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
Cobalt-SS 2 Pack – This pack contains 2x Cobalt-SS Above-Board Point Motors with “Plug & Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC, conventional switches or both.
The pack also contains the following accessory leads and accessories:
1x Cobalt-SS Extension Cable (600mm) to enable one motor to be mounted further away from the Control Board.
1x Cobalt-SS Y-connection or reverse connection cable to enable two motors to be connected to one output on the Control Board.
Linkage pack – to connect your Cobalt-SS motor to your turnout.
Mounting screws – to install both the Cobalt-SS motors and the control boards.
Cobalt-SS – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
Cobalt-SS 2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
Cobalt-SS 2 Pack – This pack contains 2x Cobalt-SS Above-Board Point Motors with “Plug & Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC, conventional switches or both.
The pack also contains the following accessory leads and accessories:
1x Cobalt-SS Extension Cable (600mm) to enable one motor to be mounted further away from the Control Board.
1x Cobalt-SS Y-connection or reverse connection cable to enable two motors to be connected to one output on the Control Board.
Linkage pack – to connect your Cobalt-SS motor to your turnout.
Mounting screws – to install both the Cobalt-SS motors and the control boards.
Weiterführende Links zu "DCCconcepts DCP-CBSS-2 2x Cobalt-SS with Controller & Accessories"
Zuletzt angesehen